Kia Cadenza (IG) (2017-2018) Fuse Diagram

Fuse box diagram (fuse layout), location, and assignment of fuses and relays Kia Cadenza (IG) (2017, 2018, 2019).

Kia Cadenza (IG) (2017-2018)

Checking and Replacing Fuses

A vehicle’s electrical system is protected from electrical overload damage by fuses. If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be broken or melted. Check those fuses first that protect the failed component, but check all the fuses before deciding that a blown fuse is not the cause. Replace any blown fuses with another with the same amperage (same color) and check the component’s operation.

Notice

  • Before changing a fuse, check the ignition key has been removed and that all the other electric devices have been turned off/disabled.
  • Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
  • Never replace a fuse with anything but another fuse of the same rating. A higher capacity fuse could cause damage and possibly a fire. Never install a wire or aluminum foil instead of the proper fuse even as a temporary repair. It may cause extensive wiring damage and a possible fire.
  • If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult at a qualified service center.
  • When replacing a blown fuse or relay, make sure the new fuse or relay fits tightly into the clips. Failure to tightly install the fuse or relay may cause damage to the wiring and electric systems.
  • Do not remove fuses, relays, and terminals fastened with bolts or nuts. The fuses, relays, and terminals may not be fastened correctly which may cause vehicle damage.
  • If you do not have a spare, use a fuse of the same rating from a circuit you may not need for operating the vehicle, such as the power outlet fuse.

Instrument Panel Fuse Box

The fuse panel is behind the cover on the driver’s side dash panel.

Instrument Panel Fuse Box Location

To check and replace a fuse:

  1. Turn the ignition switch and all other switches off.
  2. Open the fuse panel cover. If the switch is located in the “OFF” position, a caution indicator will be displayed in the cluster.
  3. Pull the suspected fuse straight out. Use the removal tool provided on the engine compartment fuse panel cover.
  4. Check the removed fuse; replace it if it is blown. Spare fuses are provided in the engine compartment fuse panel.
  5. Push in a new fuse of the same rating, and make sure it fits tightly in the clips.

Instrument Panel Fuse Box Diagram

ACircuit Protected
F110Driver Door Module, Passenger Door Module
F210MTS E-Call Module
F310Stop Lamp Switch, BCM, Sports Mode Switch
F410Console Switch, Blind Spot Detection Radar LH/RH, BCM, Smart Cruise Control Unit Crash Pad Switch, Fuel Filler & Trunk Open Switch, Lane Departure Warning Unit
F525E/R Junction Block (Fuse F36, F41, F42)
F67.5MDPS Unit
F710A/C Switch, A/C Control Module, Electro Chromic Mirror, Head Lamp LH/RH, Auto Head Lamp Leveling Device Module,Front Seat Warmer Control Module, Front Air Ventilation Seat Control Module, Rear Seat Warmer Control Module, A/V & Navigation Head Unit, MTS E-Call Module, Driver IMS Module, ATM Shift Lever Indicator, Multipurpose Check Connector
F810Instrument Cluster, Head-Up Display
F915SRS Control Module
F1020IGPM (Fuse F32), Audio, A/V & Navigation Head Unit
F117.5A/C Switch, Instrument Cluster
F1210Smart Key Control Module, Immobilizer Module
F1310Spare
F147.5A/C Switch, A/C Control Module, Ionizer, E/R Junction Block(RLY.I)
F1510Head-Up Display, Instrument Cluster, Wireless Charger Unit, Analog Clock, BCM, Rain Sensor, Driver Door Module, Power Trunk Module, Passenger Door Module, A/C Switch, A/C Control Module, Security Indicator
F1615Driver Door Module
F1710Passenger Door Module
F187.5Transaxle Range Switch, ECM/PCM
F1915BCM
F207.5Surround View Unit, Rear Seat Warmer Control Module, Front Seat Warmer Control Module, Front Air Ventilation Seat Control Module
F2115Multifunction Switch
F2210Glove Box Lamp, Passenger Foot Lamp, Driver Foot Lamp, Trunk Room Lamp, Front Vanity Lamp Switch LH/RH, Overhead Console Lamp, Room Lamp, Rear Personal Lamp LH/RH
F2320Door Lock/Unlock Relay
F2425Front Seat Warmer Control Module, Front Air Ventilation Seat Control Module
F2510Start/Stop Button Switch
F2610Stop Lamp Switch, Immobilizer Module, Smart Key Control Module
F27--
F2830AMP
F2925Passenger Safety Power Window Module, Rear Power Window Switch RH
F3020Sunroof Control Unit (Glass)
F3110Trunk Relay, Fuel Filler & Trunk Open Switch, E/R Junction Block(RLY.H)
F3210Front Monitor
F3330Power Trunk Module
F3425Rear Seat Warmer Control Module
F3510Spare
F3625Rear Power Window Switch LH, Driver Safety Power Window Module
F3730Passenger Seat Manual Switch
F3820Sunroof Control Unit (Roller)
F3915Not Used
F4010Burglar Alarm Horn Relay
F4115Smart Key Control Module
F427.5Data Link Connector, Hazard Switch, Console Switch
F4330Driver Seat Manual Switch, Driver IMS Module
F4420Front Power Outlet
F4510Rear Seat Console Switch, AMP, Surround View Unit, BCM, MTS E-Call Module, A/C Control Module, Analog Clock, Wireless Charger Unit, A/C Switch, Smart Key Control Module, Audio, Front Monitor, AA/ & Navigation Head Unit, E/R Junction Block(RLY.5)
F4610Spare
F477.5BCM, Smart Key Control Module

Advertisements


Engine Compartment Fuse Box

Engine Compartment Fuse Box Location

To check and replace a fuse:

  1. Turn the ignition switch and all other switches off.
  2. Remove the fuse panel cover by pressing the tab and pulling the cover up. When the blade type fuse is disconnected, remove it by using the clip designed for changing fuses located in the engine compartment fuse box. Upon removal, securely insert reserve fuse of the same rating.
  3. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
  4. Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consults an authorized Kia dealer.
ACircuit Protected
F180MDPS UNIT
F260IGPM (Fuse F28, IPS1, IPS3, IPS5, IPS8)
F450E/R Junction Block (RLY.1)
F550IGPM (Fuse F42, IPS2, IPS4, IPS6, IPS7)
F650E/R Junction Block (RLY.12)
F740ESP Control Module
F940Not Used
F1030W/O Smart Key: E/R Junction Block (RLY.6), Ignition Switch
With Smart Key: E/R Junction Block (RLY.6), PCB Block, (IG2 Relay)
F1280PCB BLOCK (Fuse F39,F38, F47, F52, Engine Relay)
F1360IGPM (Fuse F29, F30, F31, F33, F34, F36, F37, F38, F40, F43)
F1460E/R Junction Block (RLY.2, RLY.3)
F1650IGPM (Fuse F23, F24, F25, F26, F41, Leak Current Autocut Relay)
F1740E/R JUNCTION BLOCK (RLY.5)
F1940W/O Smart Key: Ignition Switch
With Smart Key: PCB Block, (IG1, ACC Relay)
F2030ESP Control Module, Multipurpose Check Connector
F2230E/R Junction Block (RLY.8)
F2340Not Used
F2415TCM
F2510Smart Cruise Control Unit
F2610Battery Sensor
F2720E/R Junction Block (RLY.9)
F2810E/R Junction Block (RLY.7)
F2920Not Used
F3020Not Used
F3110A/C Control Module
F3210BCM
F3310A/C Switch, Driver/Passenger Power Outside Mirror
Relay
RLY.01Blower Relay
RLY.02Cooling Fan1 Relay
RLY.03Cooling Fan2 Relay
RLY.04E-Cvvt Relay
RLY.05Power Outlet Relay
RLY.06Start Relay
RLY.07B.UP Relay
RLY.08H/LAMP Washer Relay
RLY.09Front Deicer Relay
RLY.11Fuel Filler Relay
RLY.12Rear Heated Relay

Advertisements

 

PCB Block (engine compartment fuse box)

PCB Block

ACircuit Protected
F3610ECM
F3720Front Power Outlet & Cigarette Lighter
F3820PCB Block (Horn Relay)
F3930PCB Block (Wiper Power Relay)
F4115TCM, Transaxle Range Switch
F4210ESP Control Module
F4320Rear Power Outlet
F4410Electro Chromic Mirror, Front Monitor, Audio, Rear Combination Lamp (IN) LH/RH, MTS E-Call Module
F4515Oxygen Sensor #1~#4
F4620Ignition Coil #1~#6
F4710ECM
F5220PCB Block (Fuel Pump Relay)
F5320ECM
F5415Not Used
F5510Variable Intake Solenoid Valve #1, #2, Electronic Thermostat, Purge Control Solenoid Valve, Oil Pressure Solenoid Valve, Oil Control Valve #1~#4, E/R Junction Block (RLY.2, RLY.3), PCB Block (Fuel Pump Relay)

Multi fuse

Multi fuse

If the multi fuse is blown, it must be removed as follows:

  1. Turn off the engine.
  2. Disconnect the negative battery cable.
  3. Remove the nuts shown in the picture above.
  4. Replace the fuse with a new one of the same rating.
  5. Reverse these steps to reinstall the multi fuse.

Main fuse

Main fuse

If the main fuse is blown, it must be removed as follows:

  1. Turn off the engine. 2
  2. Disconnect the negative battery cable.
  3. Remove the nuts shown in the picture above.
  4. Replace the fuse with a new one of the same rating.
  5. Reverse these steps to reinstall the main fuse.