Suzuki / Maruti Celerio (2014-2018) Fuse Diagram

Advertisements

Fuse box diagram (fuse layout), location, and assignment of fuses and relays Suzuki / Maruti Celerio (2014, 2015, 2016, 2017, 2018).

Suzuki / Maruti Celerio (2014-2018)

Checking and Replacing Fuses

The fuses are designed to melt during an overload to prevent damage to the wiring harness and electrical equipment. If any lights, accessories or other electrical controls do not operate, inspect the corresponding fuse. Look through the clear side of the fuse to see if the metal wire inside is separated. If it is, the fuse is blown and should be replaced.

Notice

  • Before replacing the fuses, turn the ignition switch to the “LOCK” position and turn off all electrical accessories.
  • Always be sure to replace a blown fuse with a fuse of the correct amperage. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire.
  • Never use a substitute such as a wire even for a temporary repair, or extensive electrical damage, and a fire can result.
  • We recommend always carrying replacement fuses in the vehicle.
  • If the main fuse or a primary fuse blows, be sure to have your vehicle inspected by an authorised Suzuki workshop.
  • If you replace a fuse and the new one blows in a short period of time, you may have a major electrical problem. Have your vehicle inspected immediately by your authorised Suzuki workshop.

Your vehicle has three types of fuses, as described below:

  • Main fuse: The main fuse takes current directly from the battery.
  • Primary fuses: These fuses are between the main fuse and individual fuses, and are for electrical load groups.
  • Individual fuses: These fuses are for individual electrical circuits.

Instrument Panel Fuse Box Diagram

The fuse box is located under the driver’s side of the dashboard. Remove the fuse box cover by pushing in at both ends and pulling off the cover.

Instrument Panel Fuse Box Diagram

AFunction/component
110Stop light
230Blower motor
310STSIG
415Accessory
510Rear fog light
610Tail light
710Back-up light
810ABS
910Meter
1015Ignition coil
1120Wiper/Washer
1210IG2 SIG
1310IG1 SIG
1410Air bag
1520Power window timer
1620Door lock
1715Horn/Hazard
1820Rear defogger
1915Dome
2030Power window
217.5ACC 2
21CNG (Compressed Natural Gas)
2215Radio 2
23-ACC 2 (Compressed Natural Gas)
24-Not used

Advertisements


Engine Compartment Fuse Box Diagram

The main fuse, primary fuses, and some of the individual fuses are located in the engine compartment. If the main fuse blows, no electrical component will function. If a primary fuse blows, no electrical component in the corresponding load group will function.

Engine Compartment Fuse Box Diagram

To remove a fuse, use the fuse puller provided in the fuse box. The amperage of each fuse is shown in the back of the fuse box cover.

AFunction/component
180FL1 (PETROL)
120FL1 (DIESEL)
250FL5 (PETROL)
40FL5 (DIESEL)
350FL4
1040ABS motor
1140T/M pump (PETROL)
40IGN2 (DIESEL)
1240Power steering
1320Front fog light
147.5T/M 2 (PETROL), CNG Valve (Compressed Natural Gas)
25F/P (DIESEL)
1530Ignition switch
1610Air compressor
1715FI (PETROL)
30FI (DIESEL)
1810T/M (PETROL)
10EPI (DIESEL)
1915Headlight (Right)
2025ABS control module
2115Headlight (Left)
2230Starting motor
2330Radiator fan
2780FL3 (PETROL)
100FL3 (DIESEL)
2880FL2 (PETROL)
100FL2 (DIESEL)
2920Glow plug
3020Glow plug 2
32-Not used
3315FI2
3420INJ DRV
35-Not used
36-Not used
Relay
4Front fog light relay
5Glow plug relay
6CNG Valve relay (Compressed Natural Gas)
7Air compressor relay
8Back up relay
9F/P relay
24FI main relay (PETROL)
Glow plug 2 relay (DIESEL)
25Starting motor relay
26Radiator fan relay
31FI main relay

 

Advertisements